How to Put Your iPhone/iPad into DFU Mode For Recovery – getinpc.info

If your Apple mobile device has stopped working and can not be restored using recovery mode, we recommend switching to DFU mode. DFU mode, which means device firmware update mode, is the mode by which Apple fixes iOS devices by default. iOS does not allow the device to boot (ignoring the iBoot mechanism) but the device can still communicate with iTunes on the PC / Mac and can be restored. You can then upgrade, downgrade, or restore the iOS software.

To set your iOS device to DFU mode, you need a different button combination than any new major device released by Apple. In fact, Apple has removed the home button from the most recently modified device. However, all methods still use the power button (on the right side of the device or the on / off button at the top of the device in previous versions). The difference is that the Apple model later uses the Volume Down button instead of the Home button to enter DFU mode.

Note: : When you restore iPhone with DFU, your computer will erase and reload all the code that controls the software. Please install the hardware on iPhone. Therefore, all data on the device will be deleted .

iPhone XR, XS, XS Max

Connect iPhone XR, XS, or XS Max to your PC / Mac and make sure iTunes is running on your computer.

2. Turn iPhone off. Continue to connect to your PC / Mac.

3. Press the volume up button quickly.

4. Press the volume down button quickly.

5. Now press and hold the side button until the Power Off slider appears. Release the button and drag the slider to turn iPhone off.

6. Press and hold the side power button on your iPhone. After 3 seconds, while holding down the power button, press the volume down button (10 seconds)

. Other Release the power button only while the volume button is held pressed for 5 seconds .

8. If the screen is still black, the device is in DFU mode. A notification similar to the one above should automatically pop up iTunes.

Note: [194590109]: After step 6, if you see the Apple logo or "Connect to iTunes" screen after step 7, you were holding down the button for too long.

iPhone X, 8 Plus and 8

This method is slightly different on these models of the iPhone.

  Dfu Mode Iphonex

] 1. Connect iPhone X or 8/8 + to your Mac or PC. Make sure iTunes is running.

2. Turn iPhone off.

3. Press and hold the Power button on your iPhone. After 3 seconds While holding down the Power button, press and hold the Volume Down button. Press and hold both buttons for 10 seconds .

4. Release the power button and continue pressing for 5 seconds .

: If you see the Apple logo after step 3 or if the "Connect to iTunes" screen appears after step 4, the screen remains black. This means that the button was held down for too long.

iPhone 7 and 7 Plus

1. Connect iPhone 7/7 + to your Mac or PC. Make sure iTunes is running.

2. Turn iPhone off.

3. Press and hold the power button and volume down button simultaneously for 10 seconds

. Release the power button and continue to press the Volume Down button for another 10 seconds .

The screen stays black and an iTunes DFU message appears. "If iTunes detects iPhone in recovery mode, it is in" DFU mode "before using this iPhone with iTunes.

iPhone 6s, 6s plus, previous version, iPod touch (all versions)

Fortunately, the previous variations to iPhone 6S and all DFU modes are the same. Likewise, the method for all iPod Touch variants is the same. The method is described below.

  Dfu Mode iPhone

1. Connect your iPhone or iPod Touch to your Mac or PC. Make sure iTunes is running.

2. Turn off the device.

3. During hold down the power button on the unit for 3 seconds

4.

If the screen remains black, the unit will go into DFU mode.

iPad Pro 2018 (no home button)

Apple finally removed the home button. For the latest iPad Pro, replace it with the Face ID and Swipe gesture as shown in the iPhone series. Therefore, switching to DFU mode is slightly different from previous iPad models with the Home button. The method is described below.

1. Connect your iPad Pro to your Mac or PC. Make sure iTunes is running.

2. Turn off the device.

3. Press the volume up button quickly.

4. Press the volume down button quickly.

5. Now press and hold the side button until the Power Off slider appears. Release the button and drag the slider to turn iPhone off.

6. Hold down the side power button on your iPad for three seconds . Now hold down the power button and press the volume down button for seconds.

7. Release the power button only while another volume button is held depressed for 5 seconds [19459108]

If the screen remains black, the device will switch to DFU mode

iPad )

  Dfu Mode Ipad

On all iPad with Home button, use the following method:

1. Connect your iPad to your Mac or PC. Make sure iTunes is running.

2. Turn off the device.

3. During hold down the power button on the unit for 3 seconds

4.

If the screen remains black, the unit will go into DFU mode.

Enable DFU mode You can now upgrade / downgrade your iOS software using iTunes.

Is this article useful?

Add a Comment

User*

Your email address will not be published. Required fields are marked *

Open

Close